These settings can be used to get a connection to Voyager using a third party Huawei HG659 / HG659b.
Note that we cannot guarantee that these settings will always work. Call us on 0800 4SPEED to discuss further if you are having any issues getting connected.
Third Party Routers: Huawei HG659/HG659b
Connection Types
| ADSL | VDSL | UFB/Fibre |
| YES | YES | YES [TAGGED] |
LEDs (Lights)
| LED | STATUS | DESCRIPTION |
| Steady On | The Device is receiving power and is ready for use. |
| Off | The Device is powered off or faulty. | |
WAN | Steady On | The DSL or UFB/Fibre line is up. |
| Blinking | The Device is initializing the DSL line. | |
| Off | The line is down/port is not connected. | |
| Internet | Steady On | The Device has an IP connection, but no traffic is currently flowing. The Device has a WAN/Public IP address. PPP negotiation was successfully completed (if applicable) and the DSL or UFB/Fibre connection is up. |
| Blinking | The Device has an IP connection and is sending/receiving traffic The Device has a WAN/Public IP address. PPP negotiation was successfully completed (if applicable) and the DSL or UFB/Fibre connection is up. | |
| Off | There is no Internet connection or the gateway is in bridged mode. | |
| Steady On | The wireless network is activated. |
| Fast Blinking | The Device is communicating with wireless clients. | |
| Slow Blinking | The Device is attempting to connect to a wireless client over the WLAN using the WPS function. This process lasts for no longer than 120 seconds. | |
| Off | The wireless network is not activated. | |
VoIP | On | A SIP account is registered for the phone port, but no traffic is currently flowing. |
| Blinking | A SIP account is registered for the phone port and is sending/receiving traffic | |
| Off | The phone port does not have a sip account registered. | |
LAN | Steady On | The Device has a successful Ethernet connection with a device on the Local Area Network (LAN). |
| Blinking | The Device is sending or receiving data to/from the LAN. | |
| Off | The Device does not have an Ethernet connection with the LAN. | |
USB | On |
|
| Blinking |
| |
| Off |
|
Access Web Interface: Spark
- Open your Web browser (Edge, Internet Explorer, Firefox, Chrome, Safari).
- Access the device's web interface via entering '192.168.1.254' into the address/URL bar.
- Login to the web interface:
- Username: admin
- Password admin
Access Web Interface: Vodafone
- Open your Web browser (Edge, Internet Explorer, Firefox, Chrome, Safari).
- Access the device's web interface via entering '192.168.1.1' into the address/URL bar.
- Login to the web interface:
- Username: admin
- Password [Password is '@' followed by last 8 numbers of serial number - e.g. @48695749]
ADSL Settings
PENDING
VDSL Settings
Configure for VDSL
- From the top menu, click Internet → then Internet Settings on the left.
- Destroy any pre-existing profiles (e.g. Sparks 'INTERNET_TR069_ETH_VID_10').
- Click Add → Advanced Settings → input the following:
- Enable Connection: [Ticked]
- Service Type: DSL
- Connection Type: IP routing (PPP)
- MRU: 1492
- MSS: 0
- NAT Type: NAPT
- Enable VLAN: Ticked
- VLAN ID: 10
- 802.1p: 0
- DSL type: All
- PPP Authentication mode: PAP
- PPP Trigger Mode: Always On
- Internet Account: [user]@dsl.vygr.net (NOTE: [user] is your unique user name and can be found in the Build Doc)
- Internet Password: (Your Account password can be found in the Build Doc)
- PPP Service Name: [leave blank]
- IP Protocol Version: IPv4 + IPv6
- Static DNS:
- Primary: 114.23.1.1
- Secondary: 114.23.2.2
- IPv6 Addressing Type: SLAAC
- Click Save.
UFB/Fibre Settings
Configure for UFB/Fibre
- From the top menu, click Internet → then Internet Settings on the left.
- Destroy any pre-existing profiles (e.g. Sparks 'INTERNET_TR069_ETH_VID_10').
- Click Add → Advanced Settings → input the following:
- Enable Connection: [Ticked]
- Service Type: Internet
- Connection Type: IP routing (PPP)
- MRU: 1492
- MSS: 0
- NAT Type: NAPT
- Enable VLAN: Ticked
- VLAN ID: 10
- 802.1p: 0
- PPP Authentication mode: PAP
- PPP Trigger Mode: Always On
- Internet Account: [user]@ufb.vygr.net (NOTE: [user] is your unique user name and can be found in the Build Doc)
- Internet Password: (Your Account password can be found in the Build Doc)
- PPP Service Name: [leave blank]
- IP Protocol Version: IPv4 + IPv6
- Static DNS:
- Primary: 114.23.1.1
- Secondary: 114.23.2.2
- IPv6 Addressing Type: SLAAC
- Click Save.
Get in touch
For any additional help, give us a call on 0800 477 333 (8AM to 10PM, 7 days a week).