Instructions for checking your Fibre (UFB) settings on a Voyager Huawei HG659 router.
Checking your Voyager Huawei HG659 Router's Fibre Settings (UFB)
Before you begin:
- The following steps are for the Voyager retailed Huawei HG659 router. If you have a Huawei HG659 router from another internet service provider, the setup process may be different.
- You'll need your Voyager username (@vygr.net or @ufb.vygr.net) and password which can be located on the email we had sent to you earlier with the subject "PROV-xxxxx: Broadband Configuration Details"
- You will need to be connected to the modem's WiFi or (recommended) have a computer with an Ethernet cable plugged into one of the four yellow “LAN” ports on the back of the router.
1. Logon to the Huawei HG659 Web Interface using your web browser:
- URL - http://192.168.1.1
2. Enter the administration username and password for your router to login:
- Default user name is: !!Huawei
- Default password is: @HuaweiHgw
3. From the top menu → Click 'Internet'
4. Click 'Internet Settings' from the left side menu
5. Click the edit button under 'VOYAGER_UFB'
6. Ensure the following settings match your router's profile:
- Your Voyager username (@vygr.net or @dsl.vygr.net) and password can be located on the email we had sent to you earlier with the subject "PROV-xxxxx: Broadband Configuration Details"
7. If you made any changes Click 'Save'
8. When successful you will see 'IPv4 status' change to 'Connected' (The 'Internet' light on the front of the router will also be stable Green or blinking fast)
Get in touch
If you are experiencing any difficulty with any of these instructions, give us a call on 0800 477 333 (8AM to 10PM, 7 days a week).